TOTE Adjustable Wrap-Around Tote Tank / IBC
 Click to Enlarge  Click to Enlarge |
As Featured in The Concrete Producer
Article: What's New: Blanket Heating
Link to The Concrete Producer
The contents in your tote tanks / IBCs, such as honey, molasses, or lube oil, can be slow moving and uncooperative when you need it most, especially when winter strikes. Heat allows the content to flow at a manageable rate. The wrap-around blanket design allows you to heat a tote tank / IBC in a non-invasive way. Unlike immersion heaters, wrap-around surface heaters will not contaminate or scorch your product. An optional insulated top is offered for faster heat-up and more efficient temperature maintenance.
Designed for Tote Tanks / IBCs
- Caged
- Plastic
- Metal
The Features You Need
Product Highlights
Designed for caged, plastic, or metal tote tanks / Intermediate Bulk COntainers (IBCs)
Wrap-around blanket design allows you to heat a tote tank / IBC in a non-invasive way
Does not contaminate or scorch your product
Two separate heat zones allow you to adjust heater output when content levels lower
73/23/EEC
Specifications
|
Temperatures up to
160°F (71°C)* * maximum temperature may vary based on application (tote tank size, contents, etc) |
- Full coverage plug and play system
- Fits any tote tank width from 40" x 40" (1016mm x 1016mm) to 48" x 48" (1219mm x 1219mm)
- Three standard height sizes: 36" (914mm), 42" (1067mm), 48" (1220mm)
- Two separate heat zones (top and bottom)
- Adjustable thermostat: 50 -160°F (10 -71°C)
- Built-in manual reset high-limit safety thermostat set at 195°F (91°C) for each heat zone
- Attachment method: adjustable nylon straps with buckles (Two across the top and three around the tank)
- Silicone impregnated cloth facing and liner
- 1/4" (6mm) fiberglass insulation
- "Mouse-hole" designed for spigot
- Patented ground for your safety
- 120 / 240VAC
- Total Wattage:
- 120VAC =1440 watts
- 240VAC=2880 watts
- Power cord 6 feet (1.8m) long with standard power plug
- 120VAC = NEMA 5-15
- 240VAC = NEMA 6-15
- Optional insulated top cover [reduces heat loss and accelerates heat-up]
-
73/23/EEC
Adjustable Wrap-Around Tote Tank / IBC Heater (TOTE series) specification sheet
Product Drawing
How to Measure Your Tote Tank / Intermediate Bulk Container / IBC
 |
1. Measure the height of the tote tank / IBC not including the pallet or support stand. | ________ (Height) |
| 2. Measure the length and width of the tank. This determines the tank perimeter for the heated area. | ||
| ______(Tank Length) X 2 + ______(Tank Width) X 2 = | ________ (Perimeter) | |
| Note: If heater length measurement is below 160" (4064mm) or above 192" (4877mm), contact factory for heater recommendation. |
Ordering Information
| Height in (mm) | Total Wattage 120V / 240V | Weight lb (kg) | Part Number 120VAC | Part Number 240VAC |
| 36" (914) | 1440 / 2880 | 34 (15) | TOTE361-ADJ | TOTE362-ADJ |
| 42" (1067) | 1440 / 2880 | 40 (18) | TOTE421-ADJ | TOTE422-ADJ |
| 48" (1220) | 1440 / 2880 | 46 (21) | TOTE481-ADJ | TOTE482-ADJ |
*240VAC model is strongly recommended for applications that involve heat-up and melting due to the higher wattage
Accessories
|
|
BriskHeat® Wrap-Around Tote Tank / IBC heaters can also be configured-to-order: Contact your local distributor or BriskHeat® for more details.
- Different Sizes
- Fixed Temperature Control Points
- Other Voltages
- Different Power Plugs
Support
Documents
- TOTE Wrap-Around Tote Tank / IBC Heater Specification Sheet
-
Part # 11630: TOTE Wrap-Around Tote Tank / IBC Heater Instruction Manual
Click Here to Go Back to the Tote Tank / IBC Heaters Main Page
Save to Favorites
Print this Page