Hot Bonder

Easy-follow menu choices Allows you to perform several operations at once Stores up to 30 programs on bonder	Multiple levels of password protection Retains history of last 12 cures Advanced administrative functions including a system high temperature limit

Click Images to Enlarge

USB flash disk included

Transfer post cure data to your PC.
Analyze your data on most spreadsheet and word processor program including Microsoft^® Excel^® and Word^®
Eliminates the need for hot bonder tape printer. Print on standard 8.5 x 11" letter paper
Transfer your programs from one bonder to another
Update your hot bonder with the latest software version for FREE.


Perform cure using ACR II Hot Bonder		Save post cure data on USB flash disk (Thumb drive)		Transfer post cure data via USB port		Analyze, review, and edit post cure data on your personal computer>

Easy-to-carry case holds your ACR II Hot Bonder, heating blankets, vacuum Hoses, and accessories
Single or dual zone models
Accepts either standard or mini J-type thermocouple connectors
10 thermocouple sensors per zone
Universal voltage: 100-130VAC, 200-240VAC
1400°F (760°C) maximum temperature control
Available with built-in electric vacuum pump or vacuum venturi
Programmable to either standard or metric units
Cure recipes can be edited on hot bonder or on included BriskHeat^® Recipe Data Editor for Windows^® software
Pre-programmed with English and German languages
73/23/EC (low voltage directive) and 89/336/EC (EMC directive) for part number ACR-IIN1E30 and ACR-IIN1V30

Top View

Click to Enlarge

Side View

Click to Enlarge

Single Zone, Internal Electric Vacuum Pump Model shown above. Cases vary based on model.

10.4" (264mm) touch screen with easy-to-use interface
USB port for data transfer (USB flash disk included)
Input ground fault interrupter breaker protected
Audible and visual alarms for high and low temperature / vacuum limits
Digital data logger: prints and records real-time status of cure including program parameters

Input Voltage: 100-130VAC, 200-240VAC
MAINS supply voltage fluctuations up to ±10% of the nominal voltage
Transient over voltages typically found on a Category II power source: i.e. a lighting circuit
Frequency: 50-60Hz
30 amps maximum per zone
Output cord receptacle: NEMA L14-30R

Intended for use in dry environments. Do not expose to spray.
Altitude up to 6562ft (2000m)
Storage temperature range: −4 to 140°F (−20 to 60°C)
Operating temperature range: 41 to 104°F (5 to 40°C)
Maximum relative humidity: 80% for temperatures up to 88°F (31°C) decreasing linearly to 50% relative to humidity at 104°F (40°C)
Pollution degree 2 (normally only non-conductive pollution occurs, however a temporary conductivity caused by condensation must be expected)

Need Help Selecting the Right Hot Bonder? Click Here

Part Number (120V)	Part Number (240V)	Number of Zones	Vacuum Source	Unit Size with Lid	Unit Weight with Lid	NSN
ACR-IIN1V30SR01	ACR-IIN1V30SR03	1	Venturi	20" x 16" x 12.5" (508 x 406 x 318mm)	32lb (15kg)	Currently Not Available
ACR-IIN2V30SR02	ACR-IIN2V30SR04	2	Venturi	24" x 19" x 12.5" (610 x 483 x 318mm)	35lb (16kg)	Currently Not Available
ACR-IIN1E30SR01	ACR-IIN1E30SR03	1	Electric Pump	20" x 16" x 12.5" (508 x 406 x 318mm)	45lb (20kg)	4920-01-538-9296
ACR-IIN2E30SR02	ACR-IIN2E30SR04	2	Electric Pump	24" x 19" x 12.5" (610 x 483 x 318mm)	58lb (26kg)	4920-01-545-5200