SLMCAB Mid-Temperature Self-Regulating Heating Cable

Product Highlights

Ideal for pipe tracing, freeze protection, and mid-temperature process maintenance applications up to 250^oF (120^oC)

Self-limiting: Automatically adjusts heat output based on surface temperature

Safe to overlap and insulate

Can be cut-to-length and terminated in the field

No temperature controller is required*

* If a specific process temperature is needed, a temperature controller is required.

Specifications

• Continuous maintenance temperature: 250^oF (120^oC)
• Intermittent exposure temperature: 366^oF (185^oC)
• 5, 10, or 15 watts/ft (16, 33, 49 watts/m)
• Supply voltages: 110 - 120VAC or 208 - 277VAC
• Moisture, chemical, and flame resistant
• 16AWG bus wires
• Tinned copper braid resistance: 0.003 ohms/ft (0.010 ohms/m)
• T-Rating: T3**

** Electrical equipment T-rating codes define the maximum surface temperature that equipment will reach. It is used in hazardous (classified) area applications.

Approvals

Ordinary Locations Hazardous (Classified) Locations Class I, Division 2, Groups B, C, D Class II, Division 2, Groups F, G Class III, Division 2	Ordinary Locations 3(A,B,C), 5(A,B) Hazardous (Classified) Locations Class I, Division 2, Groups B, C, D Class II, Division 2, Groups E, F, G Class III, Division 2

Approvals valid only when used with appropriate heating cable
and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations.

Outer Layer Options

Maximum Circuit Length in Feet per Circuit Breaker Size

Note: Special consideration must be given for the circuit breaker due to the high initial in-rush currents.

Voltage Adjustment