KM Constant-Wattage Heating Cable

Product Highlights

Temperatures up to 500^oF (260^oC)

Power remains constant regardless of temperature

Can be cut-to-length at job site

16 or 12AWG bus wires

Ideal for a wide range of general purpose applications

• Freeze protection
• Viscosity control
• High temperature process control
• Power plants
• Oil refineries
• Water treatment plants
• Food processing plants
• Other explosive atmospheres

Specifications

• Maximum exposure temperature is 500^oF (260^oC)
• Moisture, chemical, flame, and radiation resistant
• 12 or 16AWG bus wires
• Dimensions: 0.2" x 0.3" (5 x 8mm)
• Weight per 500-foot (152m) spool:
  • 16AWG cable: 37lb. (17kg)
  • 12AWG cable: 45lb. (20kg)

TEFLON^® is a registered Trademark of DuPont used under license.

Approvals

Ordinary Locations
Hazardous Locations:
Class I Division 2 Groups B, C, D
Class II Division 2 Groups F, G
Class III Division 2

Approval valid only when used with appropriate heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations.

Maximum Circuit Length in ft (m)

Circuit Module Length in ft (m)

Note: when ordering, please allow a minimum of 1 module length extra for terminations.

Adhesive Tape

Helps to isolate the cable from the insulation and provides intimate contact with surface to be heated.

Caution Label

Required by code for every 100ft (3m) of pipe.

Heat Conductive Putty

Used to fill voids between cable and pipe surface.

Monitor Light Kit

Provides a continuity check at the termination end of a cable circuit.

Pipe Reducer

Pipe Standoff

Cast aluminum fitting.

Pipe Strap

Stainless steel pipe straps used to secure pipe standoff to pipe.

RTV Sealant

Silicone sealant used to seal lead pouches, end pouches, and pipe standoffs.