CTL Cut-to-Length Silicone Rubber Heating Tapes

Product Highlights

Well suited for pipeline tracing

Can be cut-to-length at job site

Moisture and chemical resistant

Exceptional flexibility

Specifications

• Maximum exposure temperature: 450°F (232°C)
• Silicone rubber extruded outer sheath
• Fiberglass knitted and braided heating element construction
• Multi-stranded resistance wire for increased durability and flexibility
• Nominal watts per square inch (square mm): varies with length
• Suitable for electrically conductive surfaces
• 100-240VAC
• Termination kits required
• Temperature controller required

Ordering Information

Cut-to-length heating tape is a series heating element design; wattages and amperages vary with the tape length. To determine the actual wattage output for a given length, follow the steps in the Cut-to-length application guide.

Contact us for assistance. Available factory finished for immediate use.

Part Number	Ohms Per ft (m)	Volts	Min ft (m)	Max ft (m)	Width in (mm)
CTL-A	0.10 (0.328)	120VAC 240VAC	57 (17) 114 (35)	440 (134) 220 (67)	1 (25)
CTL-B	0.90 (2.953)	120VAC 240VAC	19 (6) 38 (12)	74 (23) 146 (45)	1 (25)
CTL-C	10.00 (32.808)	120VAC 240VAC	6 (2) 12 (4)	22 (7) 44 (13)	1 (25)

Support

Documents

• XtremeFlex^® Cut-To-Length Silicone Rubber Heating Tape Specification Sheet
• CTL Cut-To-Length Heating Tape Installation Manual (PN: 10315-02)
• CTLJK Jumper Termination Instruction Manual (PN: 10315-03)
• CTLLK-EK Lead and End Termination Instruction Manual (PN: 10315-04)
• CTLTK Tee Termination Instruction Manual (PN: 10315-02)