Aircraft Infrared Non-Destructive Testing (NDT) Kits

Product Highlights

Perform Moisture Intrusion Testing on Elevators and Other Aircraft Components

The portable and easy heating solution for moisture intrusion testing on elevators and other aircraft components

• Method B in Airbus NonDestructive Elevator Test Manual 55-20-07, 55-20-08, 55-20-11
  • A300-600
  • A320
  • A330/340
• Your Aircraft not Listed? Contact us for a solution

Simple-to-operate preprogrammed temperature controller

Dual 110/220 volt design - No transformer needed

Heating blankets designed for the shape of your aircraft component

• Durable parallel wired heating elements
• Two-year warranty

60 years of experience

Experts in many fields of surface heating

Leaders in composite repair technology

Specifications

Temperature Controller

• Universal voltage 100-240 VAC
• Dual zone will control one individual heater, or two heaters in tandem
• Automatic and independent temperature control per heater
• Testing data is easily saved to a USB flash drive (USB flash disk included)
• Preset locked ramp/soak (slope) temperature
• Accuracy ± 1°C (1.8°F)
• End of cycle audible alarm
• Auto shut-down of heater power at end of cycle
• Differential ground fault (earth leakage) breakers
• Ground connection to elevator
• Visual or audible alarms for: ground fault, temperature limits, & thermocouple failure
• 13-minute dwell count down timer
• Additional independent 10-minute test cycle timer, manually triggered
• Simultaneous reading of both heater blanket thermocouples
• Cycle will not start if process temperature is above 60°C
• High temperature process shutdown and alarm at 90°C
• Easy to handle, wheeled transport and storage case
• Temperature controller case only 21.7" x 14.1" x 8.9" (551mm x 358mm x 226mm) 25lbs (11kg)
• Two-year warranty
• 73/23/EEC (Low Voltage Directive), 89/336/EC (EMC Directive)

Heating Blankets

• Flexible blankets
• No seams, all blankets are of a one-piece construction
• Single plug-n-play connector from the blanket to the controller containing all power and sensor wiring
• Dual voltage blankets, 110 or 220 volt
• Power density: 1400 watts/m² (0.9 watts/in²)
• Two J-type thermocouples built into each blanket(1 primary, 1 spare)
• All power and sensor wires in a single connector(plug-n-play)
• Heater blanket is very flexible and durable
• Heater blanket strain relief is built through the entire edge of the blanket for increase durability
• Insulating blankets
• Easy-to-transport storage containers included
• Heating blanket case size and weight varies by model
• Includes six 9" non-slip holding clamps
• Two-year warranty
• 73/23/EEC

Support

Documents

• Product Brochure
• Product Specification Sheet
• Instruction Manual (PN: 41039-02)
• Airbus Non Destructive Test (NDT) Manual 55-20-07

Ordering Information

Contact us for a quotation and application assistance.

Do you have a different aircraft than what is listed or need help sourcing a thermographic camera? Contact us for a solution.