BriskHeat Configure-to-Order Cloth Heating Jackets and Insulators

Our Products

Configure-to-Order Cloth Heating Jackets and Insulators

Product Highlights

Heat geometries that are unavailable with standard cloth jacket product offering

Application-specific wattages

Wide range of materials and options available to match your application

Temperatures up to 1100°F (593°C)

Utilize industry-leading engineering services

Ordering Information

Contact your local BriskHeat representative or BriskHeat direct for more information.

Configure-to-Order Cloth Jacket Options

Jacket Construction

Liner and Facing Material
Insulation Thickness
Type of Closure

Power Configuration

Voltage / Phase / Frequency
Power Plug / Connector for Lead and Jumper

Temperature Control

Centipede^® Temperature Control System
Built-in Controlling Thermostat
Field Replaceable Controlling Thermostat
Other External Temperature Control Options
Built-in Temperature Sensors

Safety Features

Built-in High-Limit Thermostat
Built-in Low-Limit Thermostat
Grounded Heating Element
Approvals

Accessories

Accessories

PDF icon Click Here for a Cloth Jacket Specification Sheet

Jacket Construction

Liner and Facing Material

Liner is the layer between the object to be heated and insulation.
Facing is the outer shell of the jacket.

TEFLON^® Grey - Standard facing material. Exposure temperatures up to 500°F (260°C). Up to Class 10 environments.
Chemstat - For cleanroom class 10. Exposure temperatures up to 600°F (315°C).
High Temperature (Samox^®) - High temperature cloth. Exposure temperatures up to 1100°F (593°C). Up to Class 100 environments.
Grey Silicone Cloth Adds a degree of moisture and chemical resistance. Exposure temperatures up to 482°F (250°C).
Aluminum - Facing material option. Exposure temperatures up to 482°F (250°C).
Fiberglass cloth - Liner material option. Exposure temperatures up to 900°F (482°C). Up to Class 100 environments.

TEFLON^® is a registered Trademark of DuPont used under license.

Top ↑

Insulation Thickness

Thickness is determined based on your application.

Top ↑

Type of Closure

Hook and Loop Fastener like VELCRO^® - Exposure temperature up to 280°F (138°C).
Mid-Temperature Hook and Loop Fastener like VELCRO^®- Exposure temperature up to 450°F (230°C).
High-Temperature Hook and Loop Fastener like VELCRO^®- Exposure temperature up to 800°F (426°C).
Hook and Lace - Similar to the hook and lace of a work boot and is used when additional strength is needed to hold the jacket in place.
Grommets - Can be used when bolts or weld studs are needed to hold the jacket to the surface.

Top ↑

Power Configuration

Voltage

Any voltage up to 600VAC

Phase

Single
3 Phase (Wye)
3 Phase (Delta)

Frequency

60Hz
50Hz
DC

Top ↑

Power Plug / Connector for Lead and Jumpers

IP 67 Four-Pin (NEMA 6P equivilent) Click to Enlarge	Amp Mate-N-Lock (3 Prong) Click to Enlarge	125VAC Twist Lock (NEMA ML-2) Click to Enlarge	250VAC Twist Lock (NEMA L6-15) Click to Enlarge
Other- please specify	None / bare wire

Top ↑

Temperature Control

Centipede^® Temperature Control System

Controls each heating jacket
Compact autotuned-PID temperature controller
Platinum RTD
Dual LED light
Networked together with CAT5 communication cable
Control and monitor the entire system from an easy to use operator interface
More details

Top ↑

Built-in Controlling Thermostat

Thermostats can be installed to act as the primary temperature control device. The use of controlling thermostats eliminates the need for external temperature control. It should be noted that controlling thermostats have a limited life span and precision. (Not available above 277VAC)

180°F (82°C), 30°F (17°C) differential
248°F (120°C), 50°F (28°C) differential
302°F (150°C), 50°F (28°C) differential
347°F (175°C), 50°F (28°C) differential
Other

Top ↑

Field Replaceable Controlling Thermostat (Patent 6,710,312)

Heating jacket can be configured to allow easy access to built-in controlling thermostat.

Top ↑

Other External Temperature Control

BriskHeat^® offers many different types of temperature control options. Click Here for more details.

Top ↑

Temperature Sensor

Sensor can be built-in heating jacket or be applied separately.

Platinum RTD with Centipede^® Control Option
Type J Thermocouple
Type K Thermocouple
Thermistor
Other- please specify

Top ↑

Safety Features

Built-in High-Limit Thermostat

Used to prevent over-temperature conditions in the event of main controller failure. If required, select a thermostat that is 20% higher than the required operating temperature, yet low enough to avoid damage to the system in the event of controller failure. (Not available above 400VAC)

248°F (120°C), 50°F (28°C) differential
302°F (150°C), 50°F (28°C) differential
347°F (175°C), 50°F (28°C) differential
392°F (200°C), 50°F (28°C) differential
482°F (250°C), 50°F (28°C) differential
Other

Top ↑

Built-in Low-Limit Thermostat

Used to indicate a low temperature condition. If required, thermostats can be installed to provide a dry contact to be used as an alarm signal via a separate cord (not available above 277VAC).